Specification
Model : Kayak Keeper
The Kayak Keeper is a modular attractive structure for storing and protecting kayaks. The Kayak Keeper is built using an aluminum frame with plastic components for the shelving, roof, doors, and sides. It can be designed and built to accommodate 4,8,12,16,20,- - - kayaks. Every additional row will add 4 compartments until the desired number is reached. The Kayak Keeper's depth is in three foot increments and can be designed and built for 6,9,12,15,18,-- foot depths and continue in 3 foot increments till desired depth is obtained.Aluminum : Post extrusions 6063 aluminum.
Horizontal bar extrusions 6063 aluminum.
Bushing extrusions 6063 aluminum.
Anchor bracket extrusion 6063 aluminum.
All aluminum extruded in Iowa.
Finishes : Gray texture powder coat for all posts and bars.
Or
Clear anodization for all posts and bars.
Powder coating done in Iowa.
Anodization done in Minnesota.
Plastic : Thermoformed roof : white or black impact resistant plastic.
Thermoformed shelf : black impact resistant plastic.
Thermoformed door : white impact resistant plastic.
Gray panel HDPE
Black panel HDPE recycled plastic.
All plastic is made with UV protection.
HDPE panel manufactured in Iowa.
Roof, shelf, and door thermoformed in Iowa.
Fasteners : All machine screws are stainless steel.
All washers for machine screws are stainless steel.
T-slot nuts zinc coated.
Anchor bolts and washers zinc coated.
Door hinge is stainless steel.
Door offset lock is chrome finish.